Fluorescent Tube Streetlight Luminaire SFE

LUMINAIRE: Comprises canopy of sheet aluminium in stove enamel finish (CRCA MS epoxy powder coated white in case of SFE13). A control gear tray cum reflector having white stove enamel finish on reflecting surface is hinged to the canopy. An acrylic perspex and gasket makes the luminaire weather proof . The perspex is held in a frame which is locked in position by toggles on both sides. Prewired with copper wound polyester ballast, power factor improvement capacitor, push fit type lamp holder and mains connector (SFE14 & SFE 24 are prewired with aluminium ballast)

MOUNTING & CABLE ENTRY: Suitable for end mounting on pipe having 38 mm O.D. for twin tube and 32 to 35 mm O.D. for single tube version respectively.

RELAMPING: The enframed diffusers can be hinged for lamp replacement and the reflector cum gear plate can also be hinged for accessories maintenance.

APPLICATIONS: Suitable for secondary roads having less traffic density, residential areas, perimeter lighting etc.

Click on the Request For a Quotation link to request for a quotation.

Cat. Ref.	Lamp			Rotor Type Holder	Voltage (V)	Current (A)	Dimension (mm)			Approx. Wt. (Kgs)	Case lot (Nos.)	RFQ
	Type	No.	Watts				A	B	C
SFE14H	FTL	1	36 / 40	Bi - Pin	240	0.23	1310	103	120	2.8	6	Request For a Quotation
SFE24H	FTL	2	36 / 40	Bi - Pin	240	0.45	1345	130	148	3.3	6	Request For a Quotation
SFT24H / TW	FTL	2	36 / 40	Bi - Pin	240	0.45	1345	130	148	3.3	6	Request For a Quotation
SFE1214HSB	FTL	1	36 / 40	Pushfit	240	0.23	1275	104	100	2.1	6	Request For a Quotation
SFE1214HDB	FTL	1	36 / 40	Pushfit	230	0.23	1275	104	100	2.1	6	Request For a Quotation
SFE1314HSB	FTL	1	36 / 40	Pushfit	240	0.23	1275	104	100	2.1	6	Request For a Quotation
SFE1314HDB	FTL	1	36 / 40	Pushfit	230	0.23	1275	104	100	2.1	6	Request For a Quotation

SFE14H & SFE24H can be offered with top mounting arrangement in which case the cat.ref. would read as SFT14H & SFT24H respectively.