Deep Drawn Control Gear Box CG12

CONSTRUCTION: Housing of deep drawn CRCA MS sheet, painted grey from outside. The control gear box comprises two compartments, top one acts as a cover which is hinged on one side & bottom compartment is provided with detachable CRCA MS gear tray consisting of accessories like copper wound polyester ballast, power factor improvement capacitor,rewireable fuse, and an electronic ignitor for HPSV and MH lamps.

CABLE ENTRY: Three nos. 3/4" BSC (19 mm) knockouts provided for cable glands at the bottom of the box. Mains connector is suitable for 4 sq mm. incoming cable.

MOUNTING: Two nos. MS plates duly welded at the back facilitate mounting.

Click on the Request For a Quotation link to request for a quotation.

Cat. Ref.	Lamp			Voltage (V)	Current (A)	Dimension (mm)			Approx. Wt.(Kgs)	Case lot (Nos.)	RFQ
	Type	No.	Watts			A	B	C
CG1208M	HPMV	1	80	240	0.43	204	255	115	4	2	Request For a Quotation
CG1212M	HPMV	1	125	240	0.66	204	255	115	4.3	2	Request For a Quotation
CG1225M	HPMV	1	250	240	1.32	204	255	115	5.3	2	Request For a Quotation
CG1240M	HPMV	1	400	240	2.13	204	255	115	6.4	2	Request For a Quotation
CG1207S	HPSV	1	70	240	0.46	204	255	115	4.3	2	Request For a Quotation
CG1215S	HPSV	1	150	240	0.74	204	255	115	5.4	2	Request For a Quotation
CG1225S	HPSV	1	250	240	1.3	204	255	115	6.4	2	Request For a Quotation
CG1207MH	MH	1	70	240	0.46	204	255	115	4.3	2	Request For a Quotation
CG1215MH	MH	1	150	240	0.74	204	255	115	5.4	2	Request For a Quotation
CG1225MH	MH	1	250	240	1.3	204	255	115	6.4	2	Request For a Quotation
CG1225 MHM*	MH	1	250	240	1.3	204	255	115	5.3	2	Request For a Quotation

*To be used in conjunction with non integral luminaires suitable for Philips make HPIT + 250 W MH lamps.